Page 1
VERGO-TF2 with two bikes About The Wheel Holder • Front wheel needs to be removed to mount bike to VERGO-TF. This Wheel Holder safely holds the removed wheel without worry of damaging your wheel or car. • Can hold up to two wheels on the single arm. For standard 9mm quick release type wheel only. Any other system such as Thru Axle type hub cannot be used.
Page 2
Adjust the clamping force just enough Fold down the arm to hold the wheel in place. Minoura recommends that the wheel be just touching the floor, not suspended in the air. Even if you tighten the knob firmly, it would be difficult to keep the wheels in the air.
Need help?
Do you have a question about the VERGO-TF and is the answer not in the manual?
Questions and answers