Table of Contents
Advertisement
HP AdvanceStack Switch
100VG Module
For the HP AdvanceStack Switch 2000
At A Glance
The HP AdvanceStack 2-Port 100VG Module (HP J3103A) is an optional
component that you can add to an HP AdvanceStack Switch 2000 to provide
up to two 100VG ports. Each port can use one of several 100VG transceivers
designed for various 100VG media.
For information on transceiver types and availability, contact your
Hewlett-Packard networking representative.
extractor
handle
Figure 1. The HP AdvanceStack Switch 100VG Module
Features:
The HP AdvanceStack 2-Port 100VG Module can enhance
your Switch 2000 in the following ways:
You can use the module to connect different 100VG media types to
your Switch 2000.
You can add, change, or remove either the module itself or a
transceiver in the module without shutting down the entire switch.
You can install up to six 100VG modules in your Switch 2000,
enabling you to ''fully load'' the switch with up to 12 100VG ports for
high-speed networking.
port 1
transceiver
slot
switch
connector
extractor
handle
port 2
transceiver
slot
iii
Advertisement
Table of Contents
