Pause Mode - Teac Nostalgia GF-350 Owner's Manual

< No button will work while "busy" is displayed. Wait a few
seconds until "busy" disappears from the display.
< If the red indicator on the RECORD button doesn't light,
reload a recordable disc, wait a few seconds until "NO TOC"
and "CD-R" (or "CD-RW") indicators light on the display, and
press the RECORD button again.
5
If necessary, adjust the recording level using the REC
LEVEL knob.
Play the source to be recorded and adjust the recording level
so that the loudest sound does not exceed the "OVER"
indicator on the peak level meter.
The level can be adjusted from –00 (–∞) dB to 18 dB.
6 If PHONO is selected in step
arm onto the edge of the record (or the track to be
recorded).
When the turntable is stopped, the PLAY or the PAUSE
button will not work and you cannot start recording.
7
Press the PLAY or the PAUSE button to start recording.
8 If AUX is selected in step
recorded.
When the playback of the source has been finished, press the
STOP button to stop recording.
When the rotation of the turntable stops, the recording will
stop automatically.
But to prevent unwanted noise from the tone arm being
recorded, stop the recording manually by using the STOP
button.
1 , gently lower the tone
1 , play the source to be
A
To stop recording
Press the STOP button (H) to stop recording.
B
To suspend recording temporarily

(pause mode)

Press the PAUSE button (J). "busy" briefly appears on the
display, and the recording is paused.
To restart recording, press the PLAY button (y) or the
PAUSE button (J).
< You cannot restart recording while "busy" is displayed.
< Remember that every time recording is paused or stopped, a
new track number will always be assigned. It is not possible
to record in two "stages" within one track.
C Manual track division
It is possible to divide the recording into tracks while
recording.
While recording is taking place, press the TRACK
INCREMENT button. The current track number will be
incremented by one.
< The TRACK INCREMENT button works regardless of the
MANUAL/AUTO REC setting.
C A B
21