Advertisement
Quick Links
Focus XD
First time
Setup
1
Placement
Unpack the speakers and
place them in the room.
2
Power to speakers
Connect power to the speakers,
using the power cable and by
turning the switch to "I".
3
Connect speakers
Connect source outputs to inputs
on speakers.
Switch to master and slave.
For support of resolution up to
24bit/192kHz, a coax cable connection
must be applied between master digital
output and slave digital input.
4
Select INPUT or
DIRECT In
Point the remote towards
the speaker and select INPUT
or DIRECT In.
Subject to change without notice.
Please note that the latest version of this manual is available on dynaudio.com
Enjoy the crystal
clear sound
Do you have questions or want to give your feedback?
Please visit dynaudio.com/support
I
O
Advertisement
Related Manuals for Dynaudio Focus XD Series
Summary of Contents for Dynaudio Focus XD Series
- Page 1 INPUT or DIRECT In. Subject to change without notice. Please note that the latest version of this manual is available on dynaudio.com Enjoy the crystal clear sound Do you have questions or want to give your feedback?
-
Page 2: Important Safety Instructions
This product can be used in all EU regions for indoor use with no further restrictions. This product complies with the Directive 1999/5/EC. Relevant DoC for this product can be found in our Dynaudio homepage via the link: http://www.dynaudio.com/support/manuals/ Note: This product has been tested and found to doit pas produire de brouillage, et (2) l‘utilisateur...