Control Panel; First Use - IKEA ANRATTA Manual

Hide thumbs Also See for ANRATTA:
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH

Control panel

A
A
Selection push-push knob
B
Back button
C
Stop
D
Display
E
Start

First use

Settings
When the appliance is first plugged in it will
ask you to set the clock.
After a power failure the clock will flash and
needs to be reset.
Your microwave oven has a number of
functions which can be adjusted to your
personal taste.
A
1. Turn the
knob until Setting is shown
A
(approx. 3 sec).
2. Push the
knob out and turn it to choose
G
one of the following settings to adjust:
Clock, Sound, ECO, Brightness
• Clock
A
1. Press the
button (the left-hand digits
F
hour's flicker).
2. Push the
knob out and turn it to set
G
hours.
3. Press the
F
button (the two right hand
digits (minutes) flicker).
B C
D
E
F
Confirmation button
G
Adjust push-push knob
Retractable knobs
To use this type of knob,
press it in the middle.
F
G
F
G
F
G
The knob comes out.
Turn it to the required position.
Once cooking is over, turn the
knob to
restore it to its original position.
4. Turn the
G
5. Press the
F
The clock is set and in operation.
• Sound
1. Press the
F
2. Push the
G
the buzzer ON or OFF.
3. Press the
F
change.
• Eco
1. Press the
F
2. Push the
G
the ECO setting ON or OFF.
3. Press the
F
change.
When the ECO mode is on, the brightness
of the display will automatically switch to
a lower level after 1 minute. If the ECO
mode is off, the brightness will switch to
and press it again to
knob to set the minutes.
button again.
F
G
button.
knob out, and turn it to turn
button again to confirm the
F
G
button.
knob out and turn it to turn
button again to confirm the
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents