La Cimbali S39 Dolcevita 2 Use And Installation page 58

Use the "+" (30) and "-" (31) keys to adjust the clock.
The time increases (or decreases) one minute each time
the key is pressed.
If one of the keys (30 or 31) is pressed and held down for
more than 10 seconds, the minutes setting stops and the
hours setting increases (or decreases).
During the time setting phase, the seconds remain at "00".
Press key "i" (27) to display the meters.
The following message will appear on the display (5):
COUNTERS MENU
N° coffee GR1
N° coffee GR2
N° milk GR1
N° milk GR2
N° water
To access the various menus, position the cursor on the
line that interests you, using the "+" (30) or "-" (31) keys.
N.B. ONLY if the item "Customer Progr." is set on "YES"
and the item "Program. block" is set on "NO".
To access programming press the PRG (29) key;
the following message will appear on the display:
GR2
Choose GR1 (right group) or GR2 (left group) by pressing
the "+" (30) and "-" (31) keys, then press the PRG (29) key
CUSTOMER PROG.
KEY MENU
02_S39DV2.indd 22
CUSTOMER PROGRAMMING
17. Clock adjustment
18. Meter display and reset
+
25
15
10
5
10
19. How to access the programming mode
– –
GR1
22 EN
15 April
wednesday
Press the PRG (29) key and then press the "+" (30) and
"-" (31) keys to reset the number. The meter will be reset.
The total number of coffees and the number of cycles
cannot be zeroed.
The total number of grinding procedures recorded for the
two grinders (MM1 and MM2) can only be zeroed by the
installer technician when the grinders are replaced.
At this point, depending on the machine model:
- press the RES (24
previous menu;
or
- press the "OK
return to the previous menu.
The bar at the bottom of the display screen will show G1
or G2, depending on your choice:
Access to menus: press a selection key.
and "-" (31) keys to position the cursor (black line) on the
desired line, then press the PRG (29) key.
KEY MENU
Type
repetition
Water dose
MM1 cof, dose
MM2 cof, dose
Use the "+" (30) and "-" (31) keys also to modify the mes-
sage or number.
Note: When modifying data, the cursor changes to " ".
2009
15:15:04
RES (24) key to
: Use the "+" (30)
+
1 coffee
001
110
043
000
18/06/2014 15:15:33