Table of Contents
Advertisement
Configuration
•
Restrict Read-Only Community to IP: Enter an IP address in this field to specify
the only SNMP Manager permitted access to the AP's Read-Only Community. A
value of 0.0.0.0 means that there is no restriction; any IP address can access the
community.
•
Read-Write Community: This parameter specifies a community supported by the
Access Point. Actions permitted by this community are read-write (GET,
GET-NEXT, and SET). By default, the community is set to "private."
Restrict Read-Write Community to IP: Enter an IP address in this field to specify
•
the only SNMP Manager permitted access to the AP's Read-Write Community. A
value of 0.0.0.0 means that there is no restriction; any IP address can access the
community.
•
Trap Community: This parameter specifies the community that will be used by the
Access Point when generating traps to send to an SNMP manager. By default, the
community is set to "trap."
•
Send Traps to IP: This parameter specifies the IP address of the SNMP manager in
the Trap Community to which the Access Point will send traps. A value of 0.0.0.0
disables trap generation.
Radio
The Radio configuration screen offers dynamic configuration fields for the 802.11a
radio parameters, including Channel, Security, and SSID.
All manuals and user guides at all-guides.com
31
Advertisement
Table of Contents
