Table of Contents
Advertisement
Configuration
9.
When prompted, enter default in the Password field and click OK.
Note:
10. Configure the Access Point's settings as necessary or view the available
statistics. The configuration options and available statistics are described later
in this chapter.
11. Click the Submit or Apply button at the bottom of the screen to save any
configuration changes. The changes will take effect immediately, except for the
Network parameters, which will not take effect until the Access Point is rebooted.
12. When finished, close the Web browser.
All manuals and user guides at all-guides.com
The User Name field is not used; you can enter any value in this field or leave
it blank. The default Password is default; it is case sensitive. You can
change the Password at any time from the System Access configuration
screen (see "System Access" on page 38).
27
Advertisement
Table of Contents
