Table of Contents
Advertisement
Introduction
Power Port
The Harmony 802.11a Access Point has a power port on its back panel. The voltage
range for the Access Point's power connector is 10-26 VDC. Proxim recommends that
you connect only the Class 2 power supply (12V, 1 Amp) provided with the product to
the power port.
In addition, the Access Point can accept power from a Harmony Power System, which
is an alternative power source to the supplied Class 2 power supply. The Harmony
Power System is sold separately. Refer to Proxim's Web site or the Harmony Power
System User's Guide for more information.
Note:
All manuals and user guides at all-guides.com
The Access Point requires power from either a Harmony Power System or
from an external power supply. If you are not using the Harmony Power
System, connect the power supply that came with your Harmony 802.11a
Access Point to the power port.
12
Advertisement
Table of Contents
