Advertisement
Quick Links
Advertisement
Related Manuals for INNO V30
Summary of Contents for INNO V30
- Page 1 V0.06 (Optical Multi Meter) User’s manual...
- Page 2 Thank you for choosing V30 Optical Multi Meter produced by INNO! This manual is only subject to the users who have already purchased V30 Optical Multi Meters. Copying any part of this manual without any written permission by publisher is forbidden.
-
Page 3: Chapter 1 Overview
Chapter 1 Overview ② ① ③ ④ ⑥ ⑤ ⑨ ⑦ ⑧ ⑪ ⑩ 1. Optical fiber connector 6. Flicker on/off (available ( standard FC ) under the functions of “ VFL ” or “ LED ” ) 2. LED lamp 7. -
Page 4: Chapter 2 Parameters
Chapter 2 Parameters Parameters Type of detector InGaAs Type of optical fiber 2.5mm of ST/SC/FC interface universal connectors Calibrated wavelengths 850/1300/1310/1490/1550/1625nm Optical Power Measuring range from +6 to -70dBm Meter(OPM) Accuracy ± 0.02dB Linearity ± 2% Units dBm、 mW 、 uW Output power Type of optical fiber 5KM of single mode fiber(SMF) -
Page 5: Chapter 3 Functions
Chapter 3 Functions 3.1 power-on and power saving function: Power-on: Quickly press “MODE” key to turn on the instrument. Power-off: Press and hold “MODE” key for 2 seconds or more until “OFF” displays on the screen. Note: This instrument will shut down automatically without receiving any operation instruction for 10 minutes. - Page 6 3.3 Optical Power Meter (OPM) 3.5 LED lamp You can select continuous You can switch the measuring light mode of LED or flicker optical wavelengths by pressing mode of SOS coding by “T” button under the function of pressing “U” button under “OPM”.The calibrating wavelen- the function of LED.
- Page 7 3.7 Network cable/phone line test Remote module The “Network cable/ phone line test”(NET) function is used in network generic wiring and for verifying the link on-off condition of network including the sequence of testing cable connection systems. Test will begin when this NET function is enabled;...
- Page 8 Any calibration, maintenance or repair to this instrument should be carried out by qualified maintenance staff. Please contact with INNO customer engineer or access to the following website for consultation: www.innoinstrument.com Tel: +82 32 837 5600 Fax: +82 32 837 5601 Email: info@innoinstrument.com...