Timer; Sleep Timer - Philips Pro Logic FW-P73 Brochure

All manuals and user guides at all-guides.com
25
• To exit without storing the setting,
press Ç on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to CD or
TUNER mode automatically at a
preset time. It can serve as an alarm
to wake you up.
• Before setting the timer, make sure
the clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum
level until the volume level
before the set is switched to
standby mode.
1 Press and hold CLOCK/TIMER for
more than two seconds to select
timer mode.
™ "AM 12:00" or "00:00" or the
last timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode..
™ The starts flashing.

TIMER

TIMER
™ The selected source is lit while To switch off the TIMER
other available sources are 1 Press and hold CLOCK/TIMER for
flashing. more than two seconds.
2 Press CD or TUNER to select the 2 Press Ç on the system to cancel the
desired source. timer.
™ The timer is now switched off.
• Before selecting CD, make sure a CD
is loaded in the CD carousel tray. ™ The display will show "OFF" and
3 Press à or á on the system to set
the hour for the timer to start.
4 Press í or ë on the system to set
To start the TIMER again (for the
the minute for the timer to start. same preset time and source)
5 Press CLOCK/TIMER to store the 1 Press and hold CLOCK/TIMER for
start time. more than two seconds.
™ The timer is now set. 2 Press CLOCK/TIMER again to
™ The
remains on the display. store the start time.
TIMER
™ The timer is now on.
• At the preset time, the timer will be
activated. ™ The
™ The selected source will be
played.
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the
last tuned frequency will be switched
on.
– If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the CD
trays are empty, TUNER will be
selected instead.
– The timer will not activate if a recording
is in progress.

SLEEP TIMER

Sleep Timer
control)
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.
the disappears. 1 Press SLEEP TIMER on the
TIMER
remote control repeatedly to select a
period of time.
™ The selections are as follows (time
in minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™
60 ...
™ "SLEEP XX" or "OFF" will be
displayed. "XX" is the time in
appears on the display. minutes.
TIMER
2 When you reach the desired length
of time, stop pressing the SLEEP
TIMER button.
™ After this amount of time passes,
the system will switch to the
standby mode.
To switch off the Sleep Timer
• Press SLEEP TIMER repeatedly
until "OFF" is displayed, or press the
STANDBY ON button.
(only on remote
3139 116 19511 ( ENG)