Philips Pro Logic FW-P73 Brochure page 11

All manuals and user guides at all-guides.com
11
7 Adjust the sound
of all the speakers
AUSE
TEST TONE
until they are equal.
Å
When you are
LUME
satisfied with the
É
setting, press
TEST TONE again to switch off
the test signal.
Note:
– It is advisable to set the speakers' level
at normal listening level. "XX" denotes
the sound level.
When you have completed the Dolby
Pro Logic setup, you are ready to enjoy
Home Cinema sound.
• Press DPL (PRO
LOGIC)
Ç
à á
repeatedly to
select and cycle
DPL
L R
through the
BALANCE
various sound
modes.
Dolby Surround ™ Center
Phantom ™ Dolby 3 Stereo ™
Stereo ™ Dolby Surround ...
™ The Dolby Pro Logic display panel
will light up with the selection.
DOLBY PRO LOGIC
Dolby Surround Dolby 3 Stereo
This setting is for a full Dolby Surround Use this setting when full surround is
Pro Logic mode. not required, but a wide stereo sound is
desired. It only requires the left, right
• Press DPL to select the Dolby
and center speakers.
Surround mode.
™ The message • Press DPL to select the Dolby 3
"DOLBY Stereo mode.
C
SURROUND" ™ The message
L R
will be
PRO LOGIC
S S
displayed.
™ The DPL
™ The DPL
display panel
will light up.
Dolby Center Phantom
Normal Stereo
This setting is for use without the
center speaker. It redistributes the This setting is for normal stereo sound
center speaker sound to the left and without Dolby Pro Logic. It only
right speakers, providing conventional requires the left and right speakers.
stereo across the front.
• Press DPL to select the Stereo
• Press DPL to select the Dolby Pro mode.
Logic Center Phantom mode. ™ The message
™ The message
"CENTER
C
PHANTOM"
L R
™ The DPL
will be
PRO LOGIC
S S
displayed.
™ The DPL
display panel
will light up.
Important!
1 For the best Dolby Pro Logic
sound, switch on DPL with DSC
set to "Classic".
2 Dolby Pro Logic mode will
automatically switch to normal
Stereo mode when headphones
are connected.
3 Switch to normal stereo mode
"DOLBY 3
when you record on a tape.
C
STEREO" will
L R
be displayed.
PRO LOGIC
S S
display panel
will light up.
"STEREO"
C
will be
L R
displayed. PRO LOGIC
S S
display panel
will light up.
3139 116 19511 ( ENG)