Philips Pro Logic FW-P73 Brochure page 28

All manuals and user guides at all-guides.com
28
Tape Deck Operation
Recording or playback cannot be
made or there is a decrease in
audio level.
• Dirty tape heads, capstans or
pressure rollers.
™ See section on tape deck maintenance
(page 27).
• Magnetic build-up in the record/
playback head.
™ Use demagnetizing tape.
Recorded material sounds
strange.
• Tape was recorded in one of the
Dolby Pro Logic modes.
™ Switch off Dolby Pro Logic mode when
recording.
General
System does not react when any
button is pressed.
• Electrostatic discharge.
™ Press STANDBY ON to switch the
system off. Remove the AC power plug
from the wall outlet, then reconnect
the power plug and switch on the
system again.
TROUBLESHOOTING
No or poor sound. Remote control has no effect on
• Volume is not turned up. the system.
™ Adjust VOLUME.
• Wrong source is selected.
™ Select the source (CD, TUNER, etc.)
• The headphones are connected.
™ Disconnect the headphones.
before pressing the function button,
( É , í , ë , etc.).
• Speakers are not connected or are
connected wrongly. • The distance to the system is too
™ Check that the speakers are large.
connected correctly. ™ Reduce the distance.
™ Make sure the stripped speaker wire is • Batteries are inserted incorrectly.
clamped. ™ Insert the batteries with their polarities
(+/– signs) as indicated.
Reversed left and right sound.
• Batteries are exhausted.
• Speakers are connected wrongly.
™ Replace the batteries.
™ Check the speaker connections and
Timer is not working.
location.
• Clock is not set.
Lack of bass sound or apparently
™ Set the clock.
imprecise physical location of
• Timer is not switched on.
musical instruments.
™ Press CLOCK/TIMER to switch on the
• Speakers are connected wrongly.
timer.
™ Check the speaker connection for
• Recording is in progress.
proper phasing, colored/black wires to
™ Stop recording.
colored/black terminals.
Clock setting is erased.
• There was a power failure.
™ Reset the clock.
System displays features
automatically; buttons flash
continuously.
• Demonstration mode is switched
on.
™ Press and hold Ç (on the system) for
five seconds to switch off the
demonstration.
All lighted buttons are not lit.
• Equalizer Display is in NITE mode.
™ Press SOUND 3 or 4 to select other
Equalizer Display.
3139 116 19511 ( ENG)