Troubleshooting - EINHELL RT-PG 2500 Original Operating Instructions

Anleitung_RT_PG_2500_SPK7:_

9. Troubleshooting

Fault Cause
Engine does not start Automatic oil cut-out has not
responded
Spark plug fouled
No fuel
Generator has too little or no Controller or capacitor defective
voltage
Overcurrent circuit-breaker has
triggered
Air filter dirty
01.06.2010 10:15 Uhr Seite 9
Remedy
Check oil level, top up engine oil
Clean or replace spark plug
(electrode spacing 0.6 mm)
Refuel / have the petrol cock
checked
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the filter
GB
9