Pakedge Device & Software K60D Quick Start Manual

LED and Interface Descriptions
FRONT OF ROUTER
LED Status
Green The router is powered on.
Power
Off The router is turned off.
Green On during start-up or reboot.
Status
Off Normal operation.
HA Green Unit is being used in an HA cluster.
Green Port is online (link established).
LINK/ACT
Flashing Green Activity
Ports 1 - 7
Green Connected at 1000 Mbps.
SPEED Amber Connected at 10/100 Mbps.
Off Not connected.
Green Port is online (link established).
LINK/ACT
Flashing Green Activity
WAN1,WAN2,
Amber Connected at 10/100 Mbps.
DMZ
SPEED
Off Not connected.
BACK OF ROUTER
Interface Type Speed Protocol Description
USB Management USB mini-B USB Client port for management
Console RJ-45 9600 bps RS-232 serial Optional connection to the management
computer. Provides access to the command
line interface (CLI).
USB USB A USB Optional connection for FortiUSB key, modem,
or firmware backup and installation.
DMZ RJ-45 10/100/1000 Ethernet Optional connection to a DMZ network
WAN1 and WAN 2 RJ-45 10/100/1000 Ethernet Redundant connections to the Internet.
Internal RJ-45 10/100/1000 Ethernet 7-port switch connections on the internal
network.
Reset NA NA NA Resets router to factory defaults.
Planning Your Network
Operation
The Pakedge R60D router is preconfigured to support 5 virtual local area
networks (VLANs), each with a different priority level (see example above).
Pakedge has a full line of 802.1q (VLAN-capable) wireless access points.
Please contact Pakedge for more information.
Troubleshooting & Support
If you are unable to get the K60D/K60DUTM functional using these steps,
you can refer to the full manual on our website or contact the Technical
Support team for help.
CONTACT INFORMATION:
Website: www.pakedge.com
Email: support@pakedge.com
Phone: (650)385-8703
CUSTOMER SERVICE
Email: customerservice@pakedge.com
Phone: (650)385-8701
© Pakedge Device & Software Inc. 2014 – All Rights Reserved
pakedgedevice&software
K60D/ K60DUTM
Quick Start Guide
K60D: Gigabit preconfigured enterprise-class router—multi VLAN
K60DUTM: Gigabit preconfigured enterprise-class router with
preloaded network protection-multi VLAN
Package Contents:
R60D – Audio/video bridging router
BR6-03 - Rack mount bracket
Power Supply AC/DC (for R60D)
Power Cable (US, EUR, UK, AUS/NZ, IT or IN/SA)
USB Management Cable
6ft CAT5E Cable (WAN 1 port to internet connection)
Quick Start Guide
Pakedge Factory Default Settings for K60D / K60DUTM
R60D Username and Password pakedge / pakedgef
Network Internal Interface (VLAN1) 192.168.1.99 (Router's Default IP Address)
VLAN2 192.168.2.1
VLAN3 192.168.3.1
VLAN4 192.168.4.1
VLAN5 192.168.5.1
VLAN6 (Guest Network) 192.168.6.1
DHCP WAN1 Interface Dynamic IP Service
WAN2 Interface Dynamic IP Service
DHCP Server on Internal Interface (VLAN1) 192.168.1.110 to 192.168.1.199
DHCP VLAN2 192.168.2.110 to 192.168.2.199
DHCP VLAN3 192.168.3.110 to 192.168.3.199
DHCP VLAN4 192.168.4.110 to 192.168.4.199
DHCP VLAN5 192.168.5.110 to 192.168.5.199
DHCP VLAN6 (Guest Network) 192.168.6.110 to 192.168.6.199
FCC Declaration of Conformity
Pakedge Device & Software, 3847 Breakwater Avenue Hayward, CA 94545 declares under sole responsibility that the
K60D/K60DUTM complies with 47 CFR Parts 2 and 15 of the FCC Rules as a Class B digital device. This device complies with Part
15 of FCC Rules. Operation of the device is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference that may cause undesired operation.
.
inc