After Use; Inspection And Repairs; Electrical Safety - Black & Decker X2210 Manual

ENGLISH
• Do not allow children or any person
unfamiliar with these instructions to use
the appliance.
• Do not allow children or animals to come
near the work area or to touch the
appliance or power supply cord.
• Close supervision is necessary when the
appliance is used near children.

After use

• Switch off and remove the plug from the
socket before leaving the appliance
unattended and before changing,
cleaning or inspecting any parts of the
appliance.
• When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.

Inspection and repairs

• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may a ect
its operation.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply cord
for signs of damage, ageing and wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the power supply cord or mains plug is
damaged or defective it must be
repaired by an authorised repair agent in
4
order to avoid a hazard. Do not cut the
power supply cord and do not attempt to
repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
• Do not attempt to repair the appliance.
Take it to your nearest Black &
Decker-owned or authorised Service
Centre for repair.

Electrical safety

This product must be earthed.
Always check that the power
supply corresponds to the voltage on the
rating plate.
• Power plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(Class 1) appliances. Unmodified plugs
and matching outlets will reduce the risk
of electric shock.
Extension cables & Class 1 product
• A 3-core cable must be used as your
appliance is earthed and of Class 1
construction.
• Up to 30m (100ft) can be used without
loss of power.
To avoid the risk of electric
shock, do not immerse the cord,
plug or appliance in water or
other liquid.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorized Black & Decker Service
Center in order to avoid a hazard.