Emerson RTM-ATCA-F140 Installation And Use Manual page 27

5. Apply equal and steady pressure to the RTM to carefully slide the RTM into the shelf until you
feel resistance. Continue to gently push the RTM until the connectors engage.
6. Squeeze the lever and the latch together and hook the lower and the upper handle into the
shelf rail recesses
7. Fully insert the blade and lock it to the shelf by squeezing the lever and the latch together
and turning the handles towards the face plate.
8. Tighten the face plate screws which secure the RTM to the shelf.
9. If the front blade has already been installed (as in step 2), activate the front blade by
squeezing its lower lever and latch together and press it back into the face plate.
RTM-ATCA-F140 Installation and Use (6806800M97A)
EA Version
Hardware Preparation and Installation
27