Plug In The Power - First Data FD130 Quick Setup Manual

Plug in the power

Before using the power supply, please connect all
peripherals to the terminal. Not doing so may result
in damage to the unit or connected devices.
Connect the power cord to the power supply via the
three-prong end and receiver.
Find the power input on the right side of the terminal. Connect
the single-pole AC adapter plug to the power input at the
right side of the terminal. Turn the plug so that cord is directed
toward the back of the terminal.
The power supply should be the last item connected to the unit.
Plug the adapter into a surge protector (strongly recommended)
or a standard 120V electrical outlet.
8