Sharp FO-2950M Operation Manual page 83

All manuals and user guides at all-guides.com
all-fo2950a.book Page 81 Thursday, March 23, 2000 5:38 PM
• REDUCE/ENLARGE:
If you want to reduce or enlarge the
copy, press the REDUCTION/
ENLARGEMENT key until the
desired percentage appears in the
display (you can also scroll through
the percentages with the UP and
DOWN keys). The selections are as
follows:
100% (no reduction/enlargement)
AUTO (auto reduction to fit the
size of the printing paper.)
94%
88%
73%
50%
200%
150%
125%
Note: The enlargement/reduction setting is effective for one time only.
• RESOLUTION:
If desired, set the resolution and/or
contrast.
3
Press the COPY/HELP key.
• Copying begins.
Note:
If you place a large number of originals in the feeder, the memory may
become full before all of them can be scanned (MEMORY IS FULL will
appear in the display). If this happens, press the START key to copy the
originals which have been scanned, and then repeat the copy procedure
for the remaining originals, including the original which was being
scanned when the memory became full.
Making Copies
REDUCTION/
ENLARGEMENT
RESOLUTION
COPY/HELP
81