Sharp FO-2950M Operation Manual page 76

All manuals and user guides at all-guides.com
all-fo2950a.book Page 74 Thursday, March 23, 2000 5:38 PM
Using TEL Reception Mode
3
If the fax doesn't respond, or if the
other party first talks to you and then
wants to send a fax, press 5, *, and *
on the extension phone (only on a
tone dial phone). This signals the fax
to begin reception. Hang up.
Comments:
♦ Your fax will not accept the signal to begin reception (5**) if a
document is loaded in its feeder.
♦ If you have set the Fax Signal Receive setting to NO, press 5, *,
and * on the extension phone to begin reception.
♦ In New Zealand, not all standard telephones and answering
machines will respond to incoming ringing when connected to the
socket of the equipment.
Changing the number for remote fax activation
If desired, you can use a number other than 5 to activate fax reception
from an extension telephone. You can select any number from 0 to 9.
1
Press these keys:
The display will show:
TEL/FAX REMOTE #
ENTER (0-9) (5)
2
Enter a number from 0 to 9.
74
5
FUNCTION
4
1
(Example)