Sharp FO-2950M Operation Manual page 58

All manuals and user guides at all-guides.com
all-fo2950a.book Page 56 Thursday, March 23, 2000 5:38 PM
Sending a Fax by Automatic Dialling
8
Press 1 if the number programmed is
an area code or access code to be used
for Chain Dialling (see Chain
Dialling for area and access codes
below). Press 2 (or START) if the
number is a regular fax or voice
number.
9
Return to Step 3 to store another
number, or press the STOP key to
return to the date and time display.
Chain Dialling for area and access codes
You can also program an area code or access code in a Rapid Key or
Speed Dial number using the above programming procedure. In Step
8, press 1 to set the number as a Chain Dialling number.
After you dial an area code or access code using a Rapid Key or Speed
Dial number set for Chain Dialling, the fax machine will wait for you
to dial the remainder of the number (you can dial the remainder of the
number by pressing a Rapid Key, by pressing the Speed Dial key and
entering a Speed Dial number, or by pressing numeric keys). Note that
the remainder of the number should not be set as a Chain Dial number
if programmed in a Rapid Key or Speed Dial number.
♦ The maximum number of digits that can be dialled at one time by
Chain Dialling is 50.
Clearing auto-dial numbers
1
Press these keys:
The display will show:
FAX/TEL # MODE
1=SET,2=CLEAR
56
ON OFF
1 or 2
STOP
Step 3 or
FUNCTION
3