Storage; Preliminary Checks; Preparation Of The Installation Area - Pentair Nocchi VLR Series Instruction Manual

3.3 STORAGE

3.3.1 CHARACTERISTICS OF THE STORAGE AREA
The storage area must have the following physical characteristics:
• An extent fit for containing the
machine and the possible packaging
and allowing the hoisting by means of
the foreseen hoisting means
3.3.2 ENVIRONMENTAL CHARACTERISTICS OF THE STORAGE AREA
The storage area must have the following environmental characteristics:
• Allowed temperature range:
-15 °C ÷ +50 °C
DANGER
Possibility of machine fall. Secure the machine or store it in an inaccessible place.
Do not put the machines one on top of the other.
ATTENTION
Keep the machine in vertical position with the motor in the upper part.

3.4 PRELIMINARY CHECKS

3.4.1 CHECK FOR DAMAGES
• Check the integrity of the packaging
if present
Check that the machine is not damaged, in particular check the integrity of:
• Motor fan cover
• Terminal box cover
ATTENTION
Keep the original packaging, if present, for a possible future transport of the machine.
3.4.2 DAMAGE SIGNALLING
In case of non-compliance or damages, signal to PENTAIR INTERNATIONAL S.a.r.l. or to the seller the problem within 8 (eight)
days from the purchase date.

3.5 PREPARATION OF THE INSTALLATION AREA

3.5.1 CHARACTERISTICS OF THE INSTALLATION AREA
The machine installation area must have the following characteristics:
• Facilitate the positioning and access
to the machine
• Allow a safe connection to the electric
system
• Even and horizontal resting surface
• Resting surface having a carrying
capacity exceeding the weight of the
number of stored machines
• Relative humidity range: 30 ÷ 90%
• Open the packaging, if present, and
extract the machine
• External lining
• Allow safe connections to piping
• Presence of a fit natural
and/or artificial lighting allowing safe
operation
• Protection form possible accidental
bumps
• Protection from atmospheric agents
• Check that the received machine
matches the ordered one
• Cast iron parts
• A minimum distance of 150 mm
between any machine point and any
obstacle
• Ensure sufficient ventilation for the
motor fan
GB
33