Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pentair HYDROMATIC NSPG 200
Summary of Contents for Pentair HYDROMATIC NSPG 200
- Page 1 NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system. Item # E-03-357 | Part # 5625-357-1 | © 2015 Pentair Ltd. | 06/09/15...
- Page 2 General can be furnished for mounting to by two mechanical seals with an walls of basin. In either case, be oil chamber between the seals Information sure that the Hydromatic solids to provide lubrication for both handling check valve is used and seal faces.
- Page 3 3. Open gate valve in 5. Loosen set screws. 7. If necessary to replace discharge line. cutters, remove capscrew, 6. Tighten hex head capscrews washer and radial cutter 4. Turn pump on. If pump until axial cutter just drags from shaft. Radial cutter and runs and sump liquid does on cutter ring when radial impeller are screwed onto...
- Page 4 pump must be completely 6. Refill seal chamber and on hardwood block to dismantled and the stator motor chamber with oil. loosen stator which should dried out or replaced if the Lay pump on side to fill drop out. resistance to ground is less seal chamber.
- Page 5 NOTE: When applying power, 5. Pump clogged be sure the pump is restrained 6. Defective bearings from turning by holding the 7. Defective impeller pump at the motor housing, or by clamping it in a holding fixture. Pump is noisy. 1.
- Page 6 NSPG 200 Parts List Item Eng. No. Part Description Qty. 054010102 Head – Suction 054020112 Vo lute 070330122 Im pel ler 054050025 Cut ter, Lower Radial 055060012 Cut ter, Upper Axial 054070012 Cut ter Ring, Sta tion ary 054080102 Seal Housing 054090122 Mo tor Housing, GE Motor 054090142...
- Page 7 THIS PAGE INTENTIONALLY LEFT BLANK...
- Page 8 Pentair Hydromatic will cover only the lower seal and labor thereof for all dual seal pumps. Under no circumstance will Pentair Hydromatic be responsible for the cost of field labor, travel expenses, rented equipment, removal/reinstallation costs or freight expenses to and from the factory or an authorized Pentair Hydromatic service facility.
Need help?
Do you have a question about the HYDROMATIC NSPG 200 and is the answer not in the manual?
Questions and answers