Table of Contents
Advertisement
Note:
1.
No Video
When the monitor is ON and there is
no Video signal received, the
following message will be displayed.
2.
Signal out of monitor's supported range (Please refer to Addendum)
When the frequency range of the signal is out of the monitor's specifications, the
display will show the following message on two cases:
Case 1:
The incoming frame rate is higher
than 75Hz.
In this case, the screen display may
not be centered and a warning
message appears.
Case 2:
The incoming resolution is higher
than 1280x1024.
In this case, the video data will be turned
off and a warning message appears at
center.
15
Advertisement
Table of Contents
