Checking The Air Quality - LG AS560DWR0 Owner's Manual

Checking the Air Quality

The overall air quality is indicated by the color of the air quality indicator light and the information
displayed on the status panel.
understanding the Overall Air Quality Level
The overall air quality level is determined based on the PM density and odor level detected.
The detection ranges are separated into 4 levels, and the overall air quality indicator light
turns green, yellow, orange, or red depending on the highest contamination level detected.
Overall Air
State
Quality
red Very Bad
Orange Bad
Yellow normal
Green Good
• The overall air quality is indicated by the color of the overall air quality indicator light and of
the overall air quality status
• The level (color) displayed is based on the highest level detected, whether PM density or
odor level.
Checking the Air Quality using
the indicator Light
The color of the overall air quality indicator
light provides an easy way to gauge the
overall air quality.
upper Overall air Quality
Indicator light
lower Overall air Quality
Indicator light
Note
During the initial PM sensor stabilization,
which lasts for 30 seconds, the overall air
quality indicator light turns white. The odor
sensor takes 2 minutes to stabilize, and the
odor level is not reflected in the overall air
quality indicator during this time.
24
PM density (μg/m³)
PM10 PM2.5
(fine dust) (ultra fine dust)
255 or more 56 or more
155~254 36~55
55~154 13~35
54 or less 12 or less
in the display panel.
Turning the indicator Light On/Off
Press and hold the Mode button for 3
seconds to turn the overall air quality
indicator light on or off.
Note
• The overall air quality indicator light turns
off when the sleep Timer is set.
• Turning on the overall air quality indicator
light after the sleep Timer has been set
turns on the overall air quality indicator on
the display panel as well.
Odor Level
PM1.0
State
(super ultra fine dust)
56 or more Very strong
36~55 strong
13~35 normal
12 or less weak
Level
4
3
2
1