Starting The Air Purifier; Using Smart Mode - LG AS560DWR0 Owner's Manual

Starting the Air Purifier

Press the Start/Stop button to turn the air
purifier on or off.
Note
• The product defaults to Booster mode
when used for the first time.
• The operating mode defaults to the last
mode selected, even after a power failure.
• The air purifier sensor takes 30 seconds
to stabilize and will then display the PM
levels. During stabilization,
appears in the display. You can specify
the sensor stabilization time using the air
Quality sensor Operation Time option in
the lG smartThinQ application.
– 'always On': The sensor stabilization
turns on the first time the product is
used and stays on thereafter.
– 'Only During Operation': The sensor
stabilization turns on or off with the
product.
20

using Smart Mode

use smart mode to automatically adjust the
operating mode and fan speed based on the
overall air quality.
Press the Mode button to choose the Smart
mode.
• each time you press the button, the
operating mode changes in the following
order: Smart → Booster → Dual →
Single.
Note
• Smart mode disables the Speed, Booster
ready
Speed, and Swing buttons.
• Smart mode operates either the Clean
Booster or the air purifier and controls the
fan speed depending on the air quality.