Removing Packing Materials - LG AS560DWR0 Owner's Manual

Removing Packing
Materials
unpack the product and remove any packing
tape or protective vinyl before using the
product.
1
Pull out the product from the
packaging and remove the packing
tape attached to the product.
2
Grab the top end of the back cover
and gently pull it.
• You will see "PM 1.0 & Gas
sensOr sYsTeM" on the back
cover of the product.
3
remove the upper back from the
product.
10
4
remove the support located at the
filter inlet.
• Upper filter inlet: 1 support
• Lower filter inlet: 2 supports
support
5
Remove the filter, unwrap it, and
discard the plastic wrapper.
6
Install the filter in the product.
• Make sure that the handle faces
upward.
Handle