Removing Packing
Materials
Unpack the product and remove any packing
tape or protective vinyl before using the
product.
1
Pull out the product from the
packaging and remove the fixing tape
attached on the product.
2
Grab the top end of the back cover
and gently pull it.
• You will see "PM 1.0 & GAS
SENSOR SYSTEM" on the back
cover of the product.
3
Remove the cover from the product.
Montblanc_D_Air_Cleaner_18PY_UG_INDIA_ENG.indd 13
4
Remove the support located at the
filter inlet.
Support
5
Remove the filter and its protective
vinyl.
6
Install the filter in the product.
• Make sure that the handle faces
upward.
Handle
13
2018. 3. 21. 오후 7:41