7-32
Electrical Installation
Mounting
Tightening Torque
• At the first and last drive controller in a line of drive controllers
connected to each other there mustn't any cutout be broken off at the
outer side of the touch guard.
Fig. 7-29:
Touch guard
The touch guard must always be mounted following connection work.
Note:
Risk of damage to the touch guard!
The maximum tightening torque for the fixing screw for the
touch guard is 2.8 Nm.
2.8 Nm
Rexroth IndraDrive M
hms_beruehrschutz.fh7
DOK-INDRV*-HMS+HMD****-PR01-EN-P