Suntex TC-7310-RS Operation Manual page 47

The sensor will display
the current received.
Wait until the value is
stable.
Press
display the result or wait
for the transmitter to
automatically confirm it.
Press
select the second point
closest to
solution value.
Press
single point calibration.
Press to confirm it.
Press
adjust the MLSS standard
solution value. Rinse the
sensor with distilled water
and place into the second
solution for measurement.
Press to confirm it.
The transmitter will
display the current
received. Wait until the
value is stable.
Press to confirm it.
Press
display the result or wait
for the transmitter to
automatically confirm it.
to directly
or to
the known
to complete
or to
to directly
43
Press
two- point
and directly display the
result.
Press
and proceed to multi-
point calibration
Press to confirm it.
Calibration results
overview
Press or to
move between pages.
to complete
calibration
to continue