Measurement Mode/Unit (Mode) - Suntex TC-7310-RS Operation Manual

7.4 Measurement Mode/Unit (Mode/Unit)
After entering setup mode, select "Mode/Unit" and press
measurement settings: reference table, unit, and display mode.
For TC-100, TC-500, TC-3000 electrodes, selectable modes: NTU, FTU, FNU.
For TCS-1000, selectable modes: mg/l, ppm.
Press to confirm it.
Press or
select the electrode.
Press to confirm it.
Press or
select measurement unit.
Measurement Display Settings
(continued on next page)
to
Press
select measurement unit.
to
Press to confirm it.
22
Press
Press
or to
select measurement unit.
to configure
to confirm it.
or to