LG 43SH7PE Owner's Manual page 98

48
25. Time Elapsed (Command: d l)
Displays the time that has elapsed after your monitor has
turned on.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Read status
Acknowledgment
[l][ ][Set ID][ ][OK/NG][Data][x]
* The data received is displayed in hexadecimal.
26. Product Serial Number Check (Command: f y)
Checks the serial number of the product.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Check product serial number
Acknowledgment
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is in ASCII format.
27. Software Version (Command: f z)
Checks the software version of the product.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check the software version
Acknowledgment
[z][ ][Set ID][ ][OK/NG][Data][x]
28. White Balance Red Gain (Command: j m)
Adjusts the red gain value for white balance.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00-FE: Red Gain 0-254
FF: Checks red gain value
Acknowledgment
[m][ ][Set ID][ ][OK/NG][Data][x]
29. White Balance Green Gain (Command: j n)
Adjusts the green gain value for white balance.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00-FE: Green Gain 0-254
FF: Checks green gain value
Acknowledgment
[n][ ][Set ID][ ][OK/NG][Data][x]
30. White Balance Blue Gain (Command: j o)
Adjusts the blue gain value for white balance.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00-FE: Blue Gain 0-254
FF: Checks blue gain value
Acknowledgment
[o][ ][Set ID][ ][OK/NG][Data][x]
31. White Balance Red Offset (Command: s x)
Adjusts the red offset value for white balance.
Transmission
[s][x][ ][Set ID][ ][Data][Cr]
Data 00-7F: Red Offset 0-127
FF: Checks red offset value
Acknowledgment
[x][ ][Set ID][ ][OK/NG][Data][x]
32. White Balance Green Offset (Command: s y)
Adjusts the green offset value for white balance.
Transmission
[s][y][ ][Set ID][ ][Data][Cr]
Data 00-7F: Green Offset 0-127
FF: Checks green offset value
Acknowledgment
[y][ ][Set ID][ ][OK/NG][Data][x]