Fail Over; Data Cloning; Sync Mode - LG 43SH7PE Owner's Manual

Monitor signage
Hide thumbs Also See for 43SH7PE:
Table of Contents

Advertisement

6

Fail Over

Ez Setting
This feature enables automatically switching to other input sources in
interrupted. It also enables the automatic playback of the photo and video content stored on your device.
Off: Turn off the Fail Over function.
Auto: Switch to other input sources in the predetermined order if there is no signal from the current input.
Manual: Set switching priorities for inputs when there is no signal. In case there are multiple video signals, the current
input switches to the input with the highest priority.
Reset: Reset to initial settings.
USB: You can set this option to Off, Video, or Photo.
- Off: Disable the Fail Over USB function.
- Video: If you set this feature to Auto, a video is played back when there is no input signal. If you set this feature to
Manual, a movie is played back when there is no signal from any of the prioritized inputs.
- Photo: If you set this feature to Auto, a photo slideshow is played back when there is no input signal. If you set this
feature to Manual, a photo slideshow is played back when there is no signal from any of the prioritized inputs.

Data Cloning

Ez Setting
This feature is used to copy and import the settings of the device to other devices.
Export Setting
Data: Export the settings of the device to another device.
Import Setting
Data: Import the settings of another device into the device.

Sync Mode

Ez Setting
Sync up time and content among multiple signages.
Sync
Mode: Sync up time and content among multiple signages.
- Master: Select as the Master.
- Slave: Play content at the same time as the Master monitor.
Contents
Sync: Sync the start times of content (videos or images that have been distributed by SuperSign Software)
played back on the Master and Slave monitors.
- On/Off: Enable or disable Content Sync feature.
Time
Sync: Sync the Slave monitors' clocks to the Master monitor's at a specified time via RS-232C.
- Off(0-24): Set the sync time.
This feature may not be available for all models.
Fail Over
Data Cloning
Sync Mode
order of priority
if the primary signal is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents