LG 43SH7PE Owner's Manual page 59

PM Mode
• Power Off(Default): Sets the normal DC off mode.
Sustain Aspect Ratio: Identical to normal DC off mode except that the Switching IC remains on. On certain models,
•
this applies only to a specific input mode (DisplayPort) and has the same effect as
Always
• Screen Off: Switches to
Down mode.
• Screen Off Always: Switches to
Scheduling, or Abnormal Shut Down mode, or when there is input from the remote control's
Power button or the monitor's Off button.
• Screen Off & Backlight
• This feature may not be available for all models.
NOTE
• In order for the screen to switch from
or Input button, or the monitor's On button.
Power On Delay(0-250)
• This feature prevents overload by implementing a power-on delay when multiple monitor sets turn on.
• You can set the delay interval in the range of 0 to 250 seconds.
• This feature may not be available for all models.
Power On Status
• Select the operating status of the monitor when the main power has turned on.
You can choose from among PWR (Power On), STD (Standby), and LST (Last Status).
•
• PWR (Power On) keeps the monitor powered on when the main power has turned on.
• STD (Standby) switches the monitor to Standby status when the main power has turned on.
• LST (Last Status) switches the monitor back to its previous status.
Wake On LAN
• Set whether to use Wake On
• You can set the feature to On or Off for wired network.
Wired Network: When set to On, the Wake On LAN feature is enabled, letting you turn the product on remotely
•
through a wired network.
Power On/Off History
Display the device's power on/off history.
in other input modes.
Screen Off status when entering DPM, Auto Power Off (15 min, 4 hours), or Abnormal Shut
Screen Off status when entering DPM, Auto Power Off (15 min, 4 hours), Off Time
On: Partially turns on the backlight to keep the display at a proper temperature when in
Screen Off status.
Screen Off to On status, there must be input from the remote control's Power
LAN.
9
Screen Off