Technical Specifications - Tannoy DUAL CONCENTRIC ic6 DC Owner's Manual

TECHNICAL SPECIFICATIONS

PERFORMANCE
Recommended amplifier power - Watts RMS
Continuous power handling - Watts RMS
Peak power handling - Watts (1)
Sensitivity (2.83 Volts @ 1m) (2)
Nominal impedance - Ohms
Low frequency alignment (-6dB)
Frequency response (-6dB)
DRIVE UNITS
Dual Concentric TM high frequency
TM
Dual Concentric low frequency
Magnetically shielded
CROSSOVER
Crossover frequency
Crossover type
HF adjustments
PHYSICAL
Materials
Dimensions- including grille mm (inches)
Weight kgs (lbs)
Finish options
(1) Long-term power handling capacity as defined in EIA standard RS426A.
(2) Averaged over specified bandwidth for half-space environment. For anechoic conditions, reduce by 3dB.
20-150
110
325
91dB
8
36Hz
36Hz- 36kHz
25mm (1") 25 - micron titanium dome, neodymium magnet system
165mm (6 / ") Multifibre paper pulp cone
1
2
No
1.8kHz
st st
1 order low pass, 1 order high pass
+/- 1.5dB
Baffle panel: moulded ABS
Clamps: moulded polypropylene
270 (10 / ) diameter, 104 (4
5 1
8
3.0 (6.6)
White
/ ) depth
8
5