Table of Contents
Advertisement
CONTROL PANEL
F
B
B
FIRST TIME USE
Upon first installation, the control panel performs a functional test for
about 1 second, after which it automatically switches to the "Key lock"
function.
DAILY USE
SWITCHING THE HOB ON/OFF
To switch the hob on, keep button "A" pressed for approx. 2 seconds.
The 4 cooking zone displays show "0". If within 20 seconds none of
the cooking zones is activated, the hob switches off automatically as a
safety precaution.
SWITCHING ON AND ADJUSTING COOKING ZONES
Press one of the buttons "B" corresponding to the cooking zone you
intend to use. Select the heat setting required with buttons "E" or "C".
The other selectable cooking settings go from 1 to 9. Press buttons +/
at the same time to cancel all settings.
Pressing button "+" when level 9 is reached, the "Booster" function is activated
and the letter "A" appears on the display.
IMPORTANT: the control is deactivated 10 seconds after the heat setting has
been selected.
To change the heat setting, first press the selection button "B" again, then
proceed to change the setting, using buttons "E" or "C".
MULTIPLE ZONE
After selecting the desired zone and setting the level (as described in
the previous section) press "F": an indicator above the button turns
on,activating the additional zone.
The multiple zone can only be used if:
•
The cooking zone is provided with multiple zone;
•
The power level selected is greater than 0.
To deactivate the multiple zone, press button "B" of the desired zone,
then press "F" again.
TIMER
To set the Timer function, select the desired cooking zone and power
setting then press the cooking zone key again and a luminous dot
will appear on the display of the timer-controlled cooking zone. The
indication "00" blinks on the 2 displays. Press buttons "C" or "E" to set
the time from 1 to 99.
C
F
E
−
A
B
C-E
D
D
F
A
To deactivate the function, press and hold button "D"; an acoustic signal
will sound and the corresponding led will turn off.
NOTE: If a reset occurs, repeat the procedure described above.
IMPORTANT: after 10 seconds the timer displays will show the power
setting of the other cooking zones.
To view the remaining cooking time, press the timer-controlled cooking
zone key twice.
KEY LOCK
The Key lock function is switched on by holding down button "D" until a
dot lights up above the function button. The Key lock function locks all
the hob's other functions, with the exception of the On/Off button "A".
The function remains on even after the hob is switched off and on again
and can be deactivated by pressing button "D" again until the dot above
the function button goes off.
RESIDUAL HEAT INDICATOR
When the cooking zone is switched off, the residual heat indicator "H"
remains on or flashes alternating with "0" until the temperature of the
hob returns within safety levels.
IMPORTANT: The hob's safety features include an automatic switching
off function. Prolonged use of the same heat setting triggers automatic
switch-off of the cooking zone (for example, after around 1 hour at
maximum heat setting, the cooking zone switches off).
IMPORTANT: To avoid a permanent damage the hob:
•
do not use pots with bottoms that are not flat;
•
do not use metal pots with enamelled bottom;
•
do not place hot pots/pans over the control panel.
On/Off
Cooking zone and timer selection
Heat setting increase and decrease
Key lock
Multiple zone Activation / Deactivation
EN
Advertisement
Table of Contents
