Switching off the cooking zones Power function Heating elements Control panel lock Switching off the hob Practical advice on using the appliance CRA 641 D C Safety devices Practical cooking advice KSC 640 X Precautions and tips, 10 General safety...
Installation Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance. min. 20 mm Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance.
Fixing Single-phase connection on a perfectly level The appliance must be installed The hob is equipped with a pre-connected electricity supporting surface. supply cable, which is designed for single-phase Any deformities caused by improper fixing could connection. Connect the wires in accordance with affect the features and operation of the hob.
Page 4
connection required and position the connection Connecting the electricity supply cable to the supports as shown in the following table and mains diagrams. If the appliance is being connected directly to the 4. Position the wires in accordance with the electricity mains an omnipolar switch must be information given in the following table and diagrams installed with a minimum opening of 3 mm between...
Description of the appliance Control panel The control panel described in this manual is only a representative example: it may not exactly match the panel on your appliance. INCREASE POWER button POWER and COOKING ZONE ON/OFF RESIDUAL HEAT SELECTED indicator light button indicators ON/OFF...
Extendable cooking zones Certain models are fitted with extendable cooking zones. These may be circular or oval and may vary in their extensibility (they may be double or triple hotplates). A list of controls is given below (these controls are only present in models with the extendable cooking zone option).
Start-up and use Switching off the cooking zones The glue applied on the gaskets leaves traces of grease on the glass. Before using the appliance, we recommend you remove these with a special non- To switch off a cooking zone, select it using the abrasive cleaning product.
Practical advice on using the appliance Safety switch The appliance has a safety switch which To obtain the best results from your hob: automatically switches the cooking zones off after • Use pans with a thick, flat base in order to fully they have been in operation for a certain amount of utilise the cooking zone.
Precautions and tips This appliance has been designed and manufactured • Keep any object which could melt away from the in compliance with international safety standards. The hob, for example plastic and aluminium objects, or following warnings are provided for safety reasons and products with a high sugar content.
Care and maintenance Switching the appliance off Stainless steel frame (only in models with outer frame) Disconnect your appliance from the electricity supply before carrying out any work on it. Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus.
Technical description of the models This table provides a model-by-model list of the energy absorption values, type of heating elements and diameters of each cooking zone. Hobs CRA 641 D C KSC 640 X KSC 640 X KSC 640 X Power (W)
Page 13
5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.
After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service.
Need help?
Do you have a question about the CRA 641 D C and is the answer not in the manual?
Questions and answers