Hotpoint HR 619 CH Instruction

HR 619 CH
EN
4
3
Operation of cooking zones
• Set the knob to one of position 1-6, which correspond to different temperatures.
• To switch off the cooking zones, set the knob to position "0".
DIMENSIONS OF THE COOKTOP AND WORKTOP (mm)
Type PLEVP 230V/400V 2N ~ 50/60 Hz ~ 6.2 kW
19515337600
HOB INSTRUCTION
2
To get full satisfaction from the hob, please read these instructions carefully and keep them for future consultation.
1
1. Radiating cooking zone Ø 145
2. Radiating cooking zone Ø 180
3. Radiating cooking zone Ø 145
5
4. Radiating cooking zone Ø 210
5. Rear right cooking zone control knob
6
6. Rear left cooking zone control knob
7
7. Front left cooking zone control knob
8. Front right cooking zone control knob
8
Important:
To avoid permanently damaging the glass-ceramic top,do not use:
- Pots with bottoms that are not perfectly flat.
- Metal pots with enamelled bottom.
Make sure that the voltage indicated on the rating plate is the same as the
mains voltage. Technical data is given on the rating plate on the edge of the
hob and also below:
ELECTRICAL CONNECTION
Supply voltage
230V ~ +
230V 3 ~ +
400V 2N ~ +
Conductors
Number x Size
H05-RR-F 3 x 2.5 mm
H05-RR-F 4 x 1.5 mm
H05-RR-F4 x 1.5 mm