Setti Ng Up The Repeaters - Uniden AS1052 Series User Manual

Setti ng Up the Repeaters

Your base supports a total of two (2) repeaters, including any that
were supplied with your phone.
To use the repeater function, the repeater must be registered to the
base.
Any repeaters packaged with your base are registered and ready to
use out of the box. Just pick the best location and plug it in.
Usually, you can't tell when a handset switches between the base
and the repeater in the middle of a call.
How It Works
The repeater extends the range of your base in all directions, including
up and down. Each handset will automatically connect to the repeater
or the base, depending on which signal is stronger. (The handset can
make and receive calls in exactly the same way whether it's connected
to the base or to the repeater.)
Base Coverage Area
Handsets in this area always
connect to the base.
4
Overlap Coverage
Base
Area
Handsets in
this area might
connect to the
base or the charger. Extended Coverage Area
Repeater
charger
Handsets in this area
always connect to the
charger.