Fabric Ironing Chart - Black & Decker Light 'n Easy F495SA Use And Care Book Manual

FABRIC IRONING
CHART
NOTE: Use SPRAY at any temperature setting.
STEAM should only be used in the steam area
(Settings 4 thru 7) of the Temperature Selector Dial.
Water spotting may occur if the setting is too low.
FABRIC ADJUSTABLE STEAM
ACRYLIC
ACETATE
NYLON
SILK
POLYESTER
SOME
RAYONS
PERM. PRESS
DRY IRON
COTTON
BLENDS
AT ANY
SETTING
WOOL
COTTON
LINEN
Refer to this chart for recommend-
ed Temperature and Steam Settings
and ironing instructions for various
fabrics. Always read garment labels
and follow manufacturer's ironing
instructions.
LIGHT
REGULAR
HEAVY
TEMP. IRONING INSTRUCTIONS
Dry iron on wrong side. Press
1.
washables while damp.
Dry iron on wrong side to prevent
2.
shine. Press washables while
damp.
Dry iron washables while fabric
is damp. Iron rayon fabrics on the
3.
wrong side. Steam iron if fabric
manufacturer directs.
Check care label and follow the
manufacturer's instructions for
4.
blends: use the setting for the
fiber requiring the lowest heat.
Steam iron on wrong side to pre-
vent shine, or use a press cloth on
5.
right side. Do not press complete-
ly dry.
Dry iron washables while damp.
Use steam as needed. Iron dark
6.
fabrics on wrong side to avoid
shine.
Dry iron washables while damp
and until dry. Use steam as need-
7.
ed. Iron dark linens on wrong side
to avoid shine.
10