Baxi Ecogen 24/1.0 Installation & Servicing Instructions Manual page 45

Gas fired wall mounted condensing boiler and power generator
Table of Contents

Advertisement

page 44
10.10 S­Plan with 2nd Heating Circuit
1. The appliance MUST have a permanent Live/Neutral/Earth connection. The pump must be connected to the appliance as shown.
2. Set parameter 5700 to '3' for two heating circuits ­ see section 11.3.k.
3. To control the second heating circuit a second THINK Controller is required ­ this is available as an optional extra. For guidance on installing the second THINK Controller
see section 11.3 paragraph k.
Use either a cylinder sensor or thermostat as in section 10.8 & 9

Advertisement

Table of Contents
loading

Table of Contents