Care And Cleaning - Black & Decker Digital Advantage D1500C Use And Care Book Manual

Care and Cleaning

This product contains no user-serviceable parts. Refer service to qualified service
personnel.
CLEANING OUTSIDE SURFACES
1. Make sure iron is unplugged and has cooled completely. Wipe the soleplate and outer
surfaces with a soft cloth dampened with water. Add mild household detergent. Never
use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch
or discolor the iron.
2. After cleaning, steam iron over an old cloth to remove any residue from the
steam vents.
AUTO CLEAN ® SySTEM
To keep the steam vents free of any buildup, follow these instructions about once a
month.
1. Fill the water tank well below the MAX line. Plug in the iron.
2. Turn the fabric select dial to 7 and stand the iron on its heel rest.
3. Wait for the iron to beep and display ReAdY.
4. Unplug the iron and hold over a sink with the soleplate facing down.
5. Press and hold the AUTo CleAN
water and steam will come out of the steam vents (N).
Continue to hold the AUTo CleAN
has emptied. If necessary, rock iron side to side and front to
back.
6. When finished, release the button, stand the iron on its heel rest
and plug it in. Heat for about 2 minutes to dry out any remaining
N
water.
STORING yOUR IRON
1. Unplug the iron and allow it to cool.
2. Store vertically on its heel to prevent water leaking from the
soleplate. You can wrap the cord around the smart stand for
storage (P).
P
8
®
button. Be careful, as hot
® button until all the water
NEED HELP?
For service, repair or any questions regarding your appliance, call the appropriate
800 number on cover of this book. Please DO NOT return the product to the place of
purchase. Also, please DO NOT mail product back to manufacturer, nor bring it to a
service center. You may also want to consult the website listed on the cover of this
manual.
Two-year Limited Warranty
(Applies only in the United States and Canada)
What does it cover?
• Any defect in material or workmanship provided; however, Applica's liability will not
exceed the purchase price of product.
For how long?
• Two years after date of purchase.
What will we do to help you?
• Provide you with a reasonably similar replacement product that is either new or
factory refurbished.
How do you get service?
• Save your receipt as proof of date of sale.
• Visit the online service website at www.prodprotect.com/applica, or call toll-free
1-800-231-9786, for general warranty service.
• If you need parts or accessories, please call 1-800-738-0245.
What does your warranty not cover?
• damage from commercial use
• damage from misuse, abuse or neglect
• Products that have been modified in any way
• Products used or serviced outside the country of purchase
• Glass parts and other accessory items that are packed with the unit
• Shipping and handling costs associated with the replacement of the unit
• Consequential or incidental damages (Please note, however, that some states do
not allow the exclusion or limitation of consequential or incidental damages, so this
limitation may not apply to you.)
How does state law relate to this warranty?
• This warranty gives you specific legal rights. You may also have other rights that
vary from state to state or province to province.
is a registered trademark of The Black & decker Corporation,
Towson, Maryland, USA
Made in People's Republic of China
Printed in People's Republic of China
9