Display Adjustment,Aging Mode - Philips HP L2035 Service Manual

HP L2035
14
Go to cover page
Factory mode Adjustment:
Entering factory mode as Press
simultaneously and power ON as Fig. 1shown below.
Use buttons to Factory Mode to enter byMenu
appearFig.2 as below
Use buttons to Factory Mode to enter byMenu
9300K For CAD/CAM,6500K For IMAGE MANAGEMENT,
ORIGINAL PANEL COLOR,AITO COLOR ADJUST.
Display Adjustment , Aging Mode
Menu and auto button
then
then
9 3 0 0 K R G B
6 5 0 0 K R G B
Color temperature gain adjustment. Use these menu items
to adjust the RGB gains of pre-amp for different color
temperatures, ranges from 0 to 255.
Access AGING Mode (Burn in mode) : IN Factory MODE
Step 1 :
Push Menu " " & " Auto " buttons at the same time and power ON
Step 2: Disconnect Interface (Signal) cable.
=> Bring up "Full black pattern (if black, wait 5 seconds
around)"
or "Full White pattern with character "Aging"
as below.
:
Bring up
Aging
After 5 seconds, bring up :
After 5 seconds, bring up :
Aging
After 5 seconds, bring up :
----------
----------Repeatly
How to return to Normal display (User Mode)
Method : reconnect the interface cable of LCD monitor.