Electrical Characteristics; Interface Signals - Philips HP L2035 Service Manual

GENERAL PRODUCT SPECIFICATION(Continued)
Ergonomics
Agency
Compatibility PC2001, Windows 2000, Windows 98/Me, Windows XP.
3.0

Electrical characteristics

3.1

Interface signals

The input signals can be applied in three different modes :
1). D-shell Analog
Input signal : Video, Hsync., Vsync
Video : 0.7 Vp-p, input impedance, 75 ohm @DC
Sync. : Separate sync
terminate
Positive)
2). Intel DVI Digital
Input signal : Single channel TMDS signal
20" TFT UXGA LCD MONITOR
(HUDSON3-200P4 HP L2035)
TYPE : FJ6B2S/76
BRAND : HP
2003-09-04
Yikuan YU
2003-09-04
ISO ERGONOMICS: ISO13406-2 (Class II is required for pixel
defects )(TUV/ERG )
SWEDISH ERGONOMICS AND EMISSIONS: MPRII, TCO99 , TCO 03
GERMAN ERGONOMIC APPROVAL: EK1-ITB2000 ( TUV/GS )
CCC (China), CE (Europe), CSA (Canada),
IEC950 CB Report, NOMNYCE (Mexico),
PSB (Singapore), SEMKO (Nordic), IRMA ( Argentina )
TUV (Germany), UL (USA) GOST (Russia),
B-MARK (Poland), DEMKO (Nordic), FIMKO (Nordic),
SISIR, CPA (Singapore), EZU (Czech) , MIC ( Korea)
TTL level , input impedance 2k ohm
Hor. sync Positive/Negative
Ver. sync Positive/Negative
Composite sync TTL level, input impedance 2k ohm terminate
Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p
25
HP 2035
Go to cover page
(Positive/Negative)
8639 000 14854
590 6
57