Firmware Upgraded For Cpu - Philips HP L2035 Service Manual

Configuration and procedure
There is an application software to upgrade the firmware of CPU.
Bootcode of CPU should be embeded into CPU in production line
before you use those application (.exe) file.
Flashupgrader.exe => for Win95, 98 & ME
FlashupgraderNT.exe => for Win2000, NT & XP
CPU software=>Flashupgrader.exe or FlashupgraderNT.exe
I2C & RS232 Alignment KITs(3138 106 10198)
RS232 cable(9pins to 9pins) as below
Fig. 1 => Connection for Firmware upload.
** Do not connect Mains cord to Monitor at this moment. **
OPTIONAL TOOL
I2C & RS232 Alignment Kits --------------------->
(3138 106 10198)
9 pins to 9 pins cable --------------------->
Fig. 1
D-sub cable ----------------------------------------------->
Factory mode Adjustment:
Entering factory mode as Press
simultaneously and power ON as Fig. 1shown below.
Use buttons to Factory Mode to enter by Menu
appear Fig.2 TO SEE CODE VERSION as below
Firmware upgrade for CPU
Menu and auto button
then
Fig. 3
Check Firmware version : example as below.
CODE VERSION. 0.22
CONFIG VERSION. 0.22
OSD VERSION. 0.22 2003-07-29
The updated firmware of CPU => as shown
in Fig. 4
1. Configdata.hex 2. Flasher.hex 3. Gui.hex 4. romcode.hex
Execution files => as shown in Fig. 4
1.Make sure FlashUpgrader or FlashUpgraderNT is placed in the
same directory with *.hex files and pwSDK.ini
2.There two versions of FlashUpgraders for different Windows
operating systems.
Flashupgrader.exe => for Win95, 98 & ME
FlashupgraderNT.exe => for Win2000, NT & XP
3. Remove the AC power cable
4. After double clicking the FlashUpgrader
window:
23
HP L2035
Go to cover page
2003-07-29
2003-07-29
Fig. 4
icon, you will see this