Configuring The Ip Gw Blade; Step One: Log In To The Ip Gw Blade; Step Two: Configure An H.323 Gatekeeper Or Sip Registrar (Optional) - TANDBERG MSE 8350 Getting Started Manual

Configuring the IP GW blade

Step one: Log in to the IP GW blade

All administration of the IP GW blade is performed through the web interface.
To log in to the web interface of the IP GW blade:
1 Log in to the Supervisor's web interface.
2 Go to
Hardware > Blades
3 Click
Click here to log in
name
admin
Codian recommends that you change the admin account to use a
i
password as soon as possible. To do that, go to
link, and provide the required user information.
Step two: Configure an H.323 gatekeeper or SIP registrar
(optional)
If you have H.323 endpoints, using an H.323 gatekeeper can make it easier for callers
to make their call. You can configure the IP GW blade to use an external gatekeeper
or its own built-in gatekeeper.
If you have SIP endpoints, using a SIP registrar can make it easier for callers to make
their call.
To configure the use of an H.323 gatekeeper, go to
To configure the use of a SIP registrar, go to
For more information refer to the online help topics: "Configuring H.323 settings"
and "Configuring SIP settings".
8
and click the IP address of the IP GW blade.
, and then click
with no password.
and enter the user
Change log in
, click the
Users
Settings > H.323
Settings > SIP
admin