System Status Commands - TANDBERG D1320203 User Manual

TANDBERG 3G Gateway

4.2.3. System Status Commands

Command: Description:
BRI [1..4] Displays the status of the BRI lines
BRI
Parameters:
Example of BRI feedback:
*s BRI 1 (ready=True):
Channel 1 (type=BChannel, status=Idle): /
Channel 2 (type=BChannel, status=Idle): /
*s/end
*s BRI 2 (ready=False):
Layer1Alarm: On
Layer2Alarm: On
*s/end
*s BRI 3 (ready=False):
Layer1Alarm: On
Layer2Alarm: On
*s/end
*s BRI 4 (ready=False):
Layer1Alarm: On
Layer2Alarm: On
*s/end
Dialplan Shows the dialplan configuration.
Example:
*s Dialplan 1:
Entry:
D1320203
•
BRI [1..4] indicating the status of the different BRI lines
DialplanEntryId: 1
Enabled: On
Name: "H323 - SIP"
NetType: H323
Prefix: "9047123456"
Suffix: ""
ServiceId: 2
Property:
Name: "nettype"
Value: "SIP"
Property:
Name: "avmode"
Value: "5"
Property:
Name: "prefix"
Value: ""
Property:
Name: "suffix"
Value: "@10.47.8.106"
Property:
Data port Command Interface User Guide
25