TANDBERG D1320203 User Manual page 16

TANDBERG 3G Gateway
ISDN
D1320203
used when the 3G Gateway is connected to a LAN using DHCP. When using this mode,
IP-address and IP-subnet mask are not used because the DHCP server supplies these
parameters.
•
Address: Sets the static IP address for the given LAN interface.
•
Subnetmask: Sets the subnet mask variable. Subnet mask defines the network class. If
the setting is 255.255.255.0 the local network will support up to 256 nodes, denoting a
class C network. If the setting is 255.255.0.0 the local network is a class B network with
65536 addressable nodes.
•
Gateway: Sets the gateway IP address. If a gateway is located on the LAN and the 3G
Gateway needs to reach nodes through this gateway, the gateway address can be set
using the gateway variable (the IP address of the gateway will be set automatically if the
3G Gateway is in DHCP mode)
•
Domain Name: Sets the domain name string of which the gateway is part of. Minimum
0, maximum 64 characters.
Example of IP Address feedback:
*c xConfiguration IP Address: "127.0.0.1"
Defines various ISDN protocol settings.
ISDN OutgoingBearerCapability: <H324m/UDI>
or
ISDN BRI SwitchType: <NI/ATT/Euro/Japan>
or
ISDN PRI SwitchType: <NI/ATT/Euro/Japan>
or
ISDN PRI Interface LowChannel: <1..31>
or
ISDN NationalPrefix: <S: 0, 4>
or
ISDN InternationalPrefix: <S: 0, 4>
---
Parameters:
sub-commands:
Within ISDN different bearer capabilities are used to signal the type of date (Voice, Data, H320,
H324M), which is used by switches and other equipment to determine what to do with the data or
the call (compand neglect etc).
•
OutgoingBearerCapability: sets the ISDN bearer capability for the outgoing 3G calls.
In some situations the switch does not accept calls which use the correct H324M
capability. This setting handles these situations (UDI).
•
BRI SwitchType: Sets the switch type of the 3G Gateway in case of a BRI version.
•
PRI SwitchType: Sets the switch type of the 3G Gateway in case of a PRI version.
•
PRI Interface LowChannel: This parameter sets the lowest channel to start with when
making outgoing call (to 3G handsets)
•
ISDN NationalPrefix: prefix consisting of max. 5 decimals, which precede an
outbound national telephone number.
•
ISDN InternationalPrefix: prefix consisting of max. 5 decimals, which precede
an outbound international telephone number.
Example of ISDN feedback:
*c xConfiguration ISDN OutgoingBearerCapability: H324m
*c xConfiguration ISDN PRI SwitchType: Euro
*c xConfiguration ISDN PRI Interface LowChannel: 1
*c xConfiguration ISDN NationalPrefix: "0"
Data port Command Interface User Guide
16