Standby - TANDBERG T2000 MXP User Manual

D1337703_T2000_MXP_User_Manual

3.8 Standby

The system will automatically go to Standby mode when it is not in use. In standby mode, the
screen(s) are black. It is however still possible to receive incoming calls.
How to turn on the standby mode manually:

Select Standby from the menu and select Standby Now, or

Press the End Call button on the remote control twice.
How to turn off the standby mode:

When the system is in standby, pick up the remote control, or press any of its keys to
activate the system again.
The standby mode of the system should be used if the system is to be left idle.
Note! Standby is not activated by switching off the monitor(s) (if possible to switch off
individually).
It is possible to postpone the system from entering standby mode for 1 hour or 3 hours, see
Standby for 1 hour and
40
Delay Standby for 3 hours.
Delay