TANDBERG 880 User Manual page 86

Advanced use TANDBERG Videoconferencing System
Dataport 2
Dataport 2 is dedicated to the main camera and will not be available in standard configuration.
The Codec will automatically detect WAVE cameras. If you are using a camera supporting the VISCA protocol,
select 'Mode: VISCA'. The Dataport 2 settings will then be enabled.
If 'Mode: Auto' and no camera is connected to the Dataport 2, the Baudrate, Parity, Databits and Stopbits
settings will be enabled.
For more details on connecting to the Dataport, see 'Peripheral Equipment'.
86